Flexible iPEMS: Design The Best Solution For YOU
The 3DATX parSYNC® iPEMS (integrated Portable Emissions Measurement System) provides gaseous AND nanoparticle measurements with a proprietary cartridge system. The “hot-swap” capability delivers emissions acquisition of 4-Gas measurement, NOx measurement and Nanoparticle measurement.
The 3DATX patented multi-plex basic particle sensor system provides the ability to capture multiple, dissimilar “images” of particles using Ionization, Scattering, and Opacity sensors in addition to outputs for Particle Number (PN) and Particulate Mass (PM).
parSYNC® FLEX Sensor Cartridge Configuration Options:
The parSYNC® FLEX is designed with 3 sensor cartridge ports, allowing you to customize each unit for your specific testing needs. See the cartridge options below and mix-and-match to design the solution that is right for YOU!
- Tier 1 GasMOD™ : NO/NO2
- Tier 2 GasMOD™: CO/CO2/HC/O2
- Custom GasMOD™ Sensor: Call us for more details!
- Tier 1 Particulates Sensor: PN/PM
- Tier 2 Particulates Sensor: Coming Soon! Certified PN (DC)
- Custom Particulates Sensor: Call us for more details!
Tier 1 GasMOD™ Cartridge | 3 Electrode Electro-Chemical | |
Nitric Oxide (NO) | Nitrogen Dioxide (NO2) | |
Linear Measurement Range | 0-5000 ppm | 0-300 ppm |
T90 Response Time | < 5 seconds | < 35 seconds |
Resolution | 1-2 ppm | 0.1 ppm |
Repeatability | 2% of signal | 2% of signal |
Tier 2 GasMOD™ Cartridge | Non-Dispersive Infrared Spectrometer (NDIR) | Electro-Galvanic | ||
Carbon Dioxide (CO2) | Carbon Monoxide (CO) | Hydrocarbons (HC) | Oxygen (O2) | |
Measurement Range | 0-20% | 0-15% | 0-4000 ppm (extended range up to 30,000 ppm) | 0-100% |
T90 Response Time | < 3.5 seconds | < 3.5 seconds | < 3.5 seconds | < 6 seconds |
Accuracy | ±0.3% absolute or ±3% relative | ±0.02% absolute or ±3% relative | ±8 ppm absolute or 3% relative | ±0.1% absolute or 2% relative |
Repeatability | ±0.1% absolute or ±2% relative | ±0.02% absolute or ±2% relative | ±6 ppm absolute or 2% relative | ±0.1% absolute or 2% relative |
Tier 1 Particulates Cartridge | |
Details | Data |
Particle Size Range | 10 to 10,000 nm = 0.01 to 10 µm |
Ionization Sensor | Ultra-Fine: 10 to 250 nm / peak @ < 80 nm |
Opacity Sensor | Medium: 80 to 7,000 nm / peak @ ~800 nm |
Scattering Sensor | Coarse: 250 to 10,000 nm / peak @ ~2,500 nm |
Patented Sensor Cartridges
Our parSYNC® utilizes a replaceable sensor cartridges. What does this mean for you? There’s no need to send in your emissions measurement equipment to replace these components. Instead, our hot-swappable sensor cartridges are easy to replace yourself, leading to less down time in the field!
We also offer reSYNC™, a recycling program for our cartridges, which helps to not only reduce waste and our environmental impact, but also offers discount incentives to help you save on future purchases with 3DATX.
Further Customize Your parSYNC® FLEX to Allow for Real-Time Acquisition of:
- Wireless OBD Data Logger: User-defined ECU Data for LD and HD
- Real-time GPS and Ambient Meteorology Data (pressure, temperature, humidity)
- Ports for Additional Measurements (ie – exhaust flow rate, after-treatment temperature)
The parSYNC® series of devices are powered by a common software interface, either directly on the imbedded LCD screen or from a linked laptop or smartphone, which provides a familiar and adaptable platform to each unique transportation challenge presented.
The software and hardware embedded in parSYNC® is completely customizable and extremely valuable for the 3DATX user community. This broad spectrum and flexibility of analytical and reporting functions for fleet managers, manufacturers, consultants and regulatory compliance specialists is particularly useful as national and international Governments and Authorities ramp up new emissions standards.
Features and Benefits of the 3DATX parSYNC® FLEX iPEMS Unit
- Small Size/Lightweight = Easily transported to job site
- Dimensions: 42 cm × 15.5 cm × 29.5 cm (W × H × D)/ Weight: 6.2 kg (13.7 lb)
- Battery Life: 2 hours typically (20 C ambient, warm-up using wall-power). Extended operation possible when connected to CUBE™.
- Operation via interactive LCD display or from linked laptop or smartphone
- Built-in WiFi Access-point to transmit data in real-time to laptop or smartphone
- Fully Automated Software (customizable for specific requirements)
- Simple and Quick Calibration Process (BAR97 Hi/Lo, etc)
- Internal Power Supply: 18V Standard Lithium-Ion Battery Pack (same model as CUBE™ FLEX)
- Low Power Consumption: 2A, 38W typically (5A, 100W during warm-up)
- Measurement Cartridges with Monitored and Stabilized Temperatures
- Hot-Swap Replaceable Sensor Cartridges (4-Gas, NOx and PN/PM) eliminates downtime in the field
- Rugged and Weather Resistant
- Easy to Maintain and Operate
CUBE™ FLEX (Conditioning Unit for Batch Emissions)
Support unit connected to the parSYNC® for sample conditioning and extended power supply:
- Exhaust Sample Condensate Removal
- Volatile Particle Reduction
- Extended Power Supply: Triple, Hot-Swappable 18V Standard Lithium-Ion Battery Packs
- Small Size/Lightweight = Easily transported to job site
- Dimensions: 35 cm × 14.5 cm × 29.5 cm (W × H × D)/ Weight (with one battery): 3.8 kg (8.4 lb)
- Battery Life: 2 hours typically, hot-swappable for extended operation