3DATX Corporation

Flexible iPEMS: Design The Best Solution For YOU

The 3DATX parSYNC® iPEMS (integrated Portable Emissions Measurement System) provides gaseous AND nanoparticle measurements with a proprietary cartridge system. The “hot-swap” capability delivers emissions acquisition of 4-Gas measurement, NOx measurement and Nanoparticle measurement.

The 3DATX patented multi-plex basic particle sensor system provides the ability to capture multiple, dissimilar “images” of particles using Ionization, Scattering, and Opacity sensors in addition to outputs for Particle Number (PN) and Particulate Mass (PM).

parSYNC® FLEX Sensor Cartridge Configuration Options:

The parSYNC® FLEX is designed with 3 sensor cartridge ports, allowing you to customize each unit for your specific testing needs. See the cartridge options below and mix-and-match to design the solution that is right for YOU!

Tier 1 GasMOD™ Cartridge3 Electrode Electro-Chemical
Nitric Oxide (NO)Nitrogen Dioxide (NO2)
Linear Measurement Range0-5000 ppm0-300 ppm
T90 Response Time< 5 seconds< 35 seconds
Resolution1-2 ppm0.1 ppm
Repeatability2% of signal2% of signal
Tier 2 GasMOD™ CartridgeNon-Dispersive Infrared Spectrometer (NDIR)Electro-Galvanic
Carbon Dioxide (CO2)Carbon Monoxide (CO)Hydrocarbons (HC)Oxygen (O2)
Measurement Range0-20%0-15%0-4000 ppm
(extended range up to 30,000 ppm)
0-100%
T90 Response Time< 3.5 seconds< 3.5 seconds< 3.5 seconds< 6 seconds
Accuracy±0.3% absolute
or ±3% relative
±0.02% absolute
or ±3% relative
±8 ppm absolute
or 3% relative
±0.1% absolute
or 2% relative
Repeatability±0.1% absolute
or ±2% relative
±0.02% absolute
or ±2% relative
±6 ppm absolute
or 2% relative
±0.1% absolute
or 2% relative
Tier 1 Particulates Cartridge
DetailsData
Particle Size Range10 to 10,000 nm = 0.01 to 10 µm
Ionization SensorUltra-Fine: 10 to 250 nm / peak @ < 80 nm
Opacity SensorMedium: 80 to 7,000 nm / peak @ ~800 nm
Scattering SensorCoarse: 250 to 10,000 nm / peak @ ~2,500 nm

Patented Sensor Cartridges

Our parSYNC® utilizes a replaceable sensor cartridges. What does this mean for you? There’s no need to send in your emissions measurement equipment to replace these components. Instead, our hot-swappable sensor cartridges are easy to replace yourself, leading to less down time in the field!

We also offer reSYNC™, a recycling program for our cartridges, which helps to not only reduce waste and our environmental impact, but also offers discount incentives to help you save on future purchases with 3DATX.

Further Customize Your parSYNC® FLEX to Allow for Real-Time Acquisition of:

The parSYNC® series of devices are powered by a common software interface, either directly on the imbedded LCD screen or from a linked laptop or smartphone, which provides a familiar and adaptable platform to each unique transportation challenge presented.

The software and hardware embedded in parSYNC® is completely customizable and extremely valuable for the 3DATX user community. This broad spectrum and flexibility of analytical and reporting functions for fleet managers, manufacturers, consultants and regulatory compliance specialists is particularly useful as national and international Governments and Authorities ramp up new emissions standards.

Features and Benefits of the 3DATX parSYNC® FLEX iPEMS Unit

CUBE™ FLEX (Conditioning Unit for Batch Emissions)

Support unit connected to the parSYNC® for sample conditioning and extended power supply:

3DATX Corporation

501 John James Audubon, Suite 200
Buffalo NY 14228
USA

Phone: +1 844.30.3DATX (3289)
Web: 3datx.com
Email: info@3datx.com